• Welcome to The Farming Forum!

    As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.

Mf7278 cerea users

@Badshot
Now that the barley volunteers are coming through, I've noticed that I've left a few green stripes with my new Centora..
I had the drum speed at 1,100 rpm, concave at no.3, RS at closest gap (35mm), curtain as recommended and travelling at 4.3 kph.
Am fairly sure they are walker losses as chaff spinner was on.
I've got to be doing something wrong, but I can't quite put my finger on it.. Any ideas?
I know nothing about MF combines but 4.3 kph seems slow,concave under loaded?
 

Drillman

Member
Mixed Farmer
What's anyone's thoughts on a 7274 Al cerea

Wanting a 5 walker ideally a later 36 but these seems well priced and doesn't look to have done too much work, but I haven't been to look or anything yet.

Had a 36 rs Al go up in smoke this year.


I would be stupidly over combined but if it's not costing any extra why not???
Buy a Axail Flow 2388 instead, and use the time your not waiting for a mechanic, or repairing the Fergie, to enjoy life👍
 

Salopian_Will

Member
BASE UK Member
Location
Shropshire
What's anyone's thoughts on a 7274 Al cerea

Wanting a 5 walker ideally a later 36 but these seems well priced and doesn't look to have done too much work, but I haven't been to look or anything yet.

Had a 36 rs Al go up in smoke this year.


I would be stupidly over combined but if it's not costing any extra why not???

I think the person who started this thread now runs a New Holland. Perhaps that says it all. @Badshot

PS I stand to be corrected on this!
 
If you know how to maintain and keep on top of the 36RS it should be a no-brainier for you. It will be a nicer drive than the 36 as we went from flat land 36 to auto level 7256. Knew the soft bits from 36 and combine has been fine although had to put a lot of things right when it first came.
There will be a que of people telling you it’s a crap combine but they all break and cost money to service. It’s knowing what bits to service and replace that the green and yellow brigade are good at but some of the service costs for that are eye watering.
 

Badshot

Member
Innovate UK
Location
Kent
Correct.
It went.
Now got a new Holland, which hasn't been without its issues.
Some of which are yet to be sorted to our satisfaction.
On the whole a better combine.
 

dannewhouse

Member
Location
huddersfield
What were the problems the swappers had?

I can't really comment on my 36 it was my first season with it, about 40 odd acres in, fully blown off and fuelled up, went up on the second headland.

(Was an oil pipe splitting we reckon as it did not smoulder it just engulfed in flames)
 

Claus

Member
Arable Farmer
Tell me, those who know which flex header is suitable for combine MF 7278 Cerea? It is very necessary for collecting soybeans.
 

How is your SFI 24 application progressing?

  • havn't been invited to apply

    Votes: 28 36.4%
  • have been invited to apply

    Votes: 13 16.9%
  • applied but not yet accepted

    Votes: 28 36.4%
  • agreement up and running

    Votes: 8 10.4%

Webinar: Expanded Sustainable Farming Incentive offer 2024 -26th Sept

  • 2,390
  • 49
On Thursday 26th September, we’re holding a webinar for farmers to go through the guidance, actions and detail for the expanded Sustainable Farming Incentive (SFI) offer. This was planned for end of May, but had to be delayed due to the general election. We apologise about that.

Farming and Countryside Programme Director, Janet Hughes will be joined by policy leads working on SFI, and colleagues from the Rural Payment Agency and Catchment Sensitive Farming.

This webinar will be...
Back
Top