- Location
- Larne, Northern Ireland
Lovely tractor @Pennine Ploughing a real credit to you 
will you work it? Also is your shed a container?
will you work it? Also is your shed a container?
restoration photos
- Thread starter REStracTORATION
- Start date
REStracTORATION
Member
What make of seat is that?
- Location
- 200 miles N,NW of New York
yeah I knew it would be more than a 2day job, so did most of it in a 24 foot lorry body, clear roof and plenty of light, started it in January in spare time, yes it will be worked, mainly scrapping out will not be doing period, but more light duties, hay making etcLovely tractor @Pennine Ploughing a real credit to you
- Location
- Larne, Northern Ireland
Looked like a good place to work. Glad to hear it will be used
- Location
- 200 miles N,NW of New York
it is a mf suspension seat salvaged and repaired but with different vinyl cushions on it, as original were bad to sit on
- Location
- 200 miles N,NW of New York
it will be well used next summer, and a good few members off here may see it out and about
76masseyman
Member
- Location
- Lincolncestershire
- Location
- 200 miles N,NW of New York
thanks, yes looks better with cab onSo pleased to see you kept the cab.
Looks a lovely tractor, spot on
massey765
Member
- Location
- nr clitheroe lancs
Is goin to any ploughing matches John......top job
Bleďdy bad to value ...all you need is two people wanting it at auction .....8,10, 12k or maybe more
Bleďdy bad to value ...all you need is two people wanting it at auction .....8,10, 12k or maybe more
- Location
- 200 miles N,NW of New York
no ploughing with it for now, thanks
SuperTwo
Member
- Location
- Leinster, Ireland
New bonnet back and fits nicely. Very happy
Very happy
- Location
- Lincolnshire
Is that drain cover on the bonnet original fitment?, looks horrendous.
multi power
Member
- Location
- pembrokeshire
Only just seen your 135, not seen this thread for a while, looks very good, as for value where would you get another the same? £15k I'd say, what is the pipes coming from the PTO side cover ?
SuperTwo
Member
- Location
- Leinster, Ireland
Yeah its how it was orginally done. The idea is to let the heat from the turbo to escape.
- Location
- 200 miles N,NW of New York
the pipes are from the aux pump, to feed an return oil to spool valve on other side of tractor, see photo of other side
massey765
Member
- Location
- nr clitheroe lancs
Bleddy hell John. ....keep hold of it for a bit , value keeps going up
multi power
Member
- Location
- pembrokeshire
So it's a MP then ? Or did you fit a aux pump ?
REStracTORATION
Member
That looks spot on
Does it fit well or a few tweaks needed
Out of interest how much was that?
SuperTwo
Member
- Location
- Leinster, Ireland
Few tweaks needed, for example we discovered that the bonnet tapers from 670mm at the front to 640 at the back so we had to cut and reweld the rear section to fit. We also had to trim the bottom radius where it meets the top of the side panels to get it to sit nicely.
Considering how little he had to work from he did an excellent job.
Will post some more detailed pictures later.
Very reasonably priced much less than getting a good second hand one from the continent
REStracTORATION
Member
Fine tune it, there might be a market for 1 or 2Few tweaks needed, for example we discovered that the bonnet tapers from 670mm at the front to 640 at the back so we had to cut and reweld the rear section to fit. We also had to trim the bottom radius where it meets the top of the side panels to get it to sit nicely.
Considering how little he had to work from he did an excellent job.
Will post some more detailed pictures later.
Very reasonably priced much less than getting a good second hand one from the continent