T6 180 re map.

[Fubar]

I thought one of the criteria for boost in pto work was that you also had to be travelling above a certain speed.

I'm sure it says about it in the manual.

We should have boost at 1.9 kmh according to manual.

 

[trajan16]

Have remapped several New Hollands starting with TS125a and recently T6.175. Totally improves tractor giving much more torque and power. Have used Ecopower as they dyno tractor before and after so you know what has been done. Certain late T6.180s cannot get be remapped.

 

[Hooby Farmer]

Have remapped several New Hollands starting with TS125a and recently T6.175. Totally improves tractor giving much more torque and power. Have used Ecopower as they dyno tractor before and after so you know what has been done. Certain late T6.180s cannot get be remapped.

Nissan said that about the new gtr when it came first came out. The first only took the computer whizzes a few hours to pull the horses up

 

[Timbo]

Nissan said that about the new gtr when it came first came out. The first only took the computer whizzes a few hours to pull the horses up

The GTR ECU is locked from flashing the factory maps in it... however, doesn't mean to say you cant load a new operating system to the ecu . ;-) (like installing ubuntu onto a windows pc )

 

[Fubar]

Well we had ours remapped today. Very reputable chap. Dyno tested before and after. Taken her from 161 on the shaft to 188. Bit more than i wanted but its done now.
So she was already pushing somewhere near where she was meant to be. But we should have plenty now and she should be on top of her work .She's probably up there with our t7 200 now power wise now.
If CNH aren't going to build a 200hp T6 then I guess we will have to make one ourself!!

 

[JeremyD]

Should be 180 on shaft as standard when boosting??