Trimble 750
- Thread starter Rme639
- Start date
clbarclay
Member
- Location
- Worcestershire
I haven't looked for alternatives, but just searched for the AG25 antenna and was glad I was already sat down. They appear to be about a grand just for the antenna.
Khan
Member
- Location
- Emerald Isle
The XCN 750 is the same as the Trimble GFX 350? I've been looking online at them and the NAV 500 alone is about $1000, have a nephew doing the harvest trail and considering asking him to bring the screen and antenna back in his suitcase.
How do you find the XCN 750? Are you running Viewpoint RTX or just EGNOS?
TRIMBLE GFX 350 GPS DISPLAY ULTRA ACCURATE NAV 500 fits case new holland xcn 750 | eBay
TRIMBLE GFX 350 GPS DISPLAY ULTRA ACCURATE NAV 500 fits case new holland xcn 750 | Business & Industrial, Agriculture & Forestry, GPS & Guidance Equipment | eBay!
www.ebay.ie
How do you find the XCN 750? Are you running Viewpoint RTX or just EGNOS?
- Location
- Huntingdon, UK
I believe the roof antenna has a lot of the brains in it so would have to be trimble (or nh / case badged equivalent).
The XCN 750 is the same as the Trimble GFX 350? I've been looking online at them and the NAV 500 alone is about $1000, have a nephew doing the harvest trail and considering asking him to bring the screen and antenna back in his suitcase.
TRIMBLE GFX 350 GPS DISPLAY ULTRA ACCURATE NAV 500 fits case new holland xcn 750 | eBay
TRIMBLE GFX 350 GPS DISPLAY ULTRA ACCURATE NAV 500 fits case new holland xcn 750 | Business & Industrial, Agriculture & Forestry, GPS & Guidance Equipment | eBay!www.ebay.ie
How do you find the XCN 750? Are you running Viewpoint RTX or just EGNOS?
Had a NH badged version of the 750 for 3 months now and getting on well with it, much easier to work than the older 750.
Khan
Member
- Location
- Emerald Isle
The New Holland XCN 750 is the same asTrimble GFX 350, smaller 7" screen than the GFX 750. We already run the GFX 750 doing contract fert spreading and drilling but looking at a 2nd smaller unit for GPS output mainly for sprayer tramlines and maybe retrofitting to combine with an EZ steer. I read a user comment on FB that Viewpoint RTX would give 2" pass to pass which I'd be more than happy with on combine but can't find many other reviews or opinions on it.
- Location
- SG9
With only just getting it why would it not have the antenna? Is it still in among the packaging?
I recently bought an ez pilot with cfx750 screen 2nd hand. We have been using it today topping some failed osr!
Not overly impressed with it at the moment, you have to be near enough right on the line for it to pick it up and it lost signal today so my chap started steering manually instead. It runs on rangepoint, are there software upgrades or setting so it picks up the line further away? Thanks
Not overly impressed with it at the moment, you have to be near enough right on the line for it to pick it up and it lost signal today so my chap started steering manually instead. It runs on rangepoint, are there software upgrades or setting so it picks up the line further away? Thanks
Last edited:
clbarclay
Member
- Location
- Worcestershire
I'm not certain on the 750, but on some Trimble devices there is a settings for maximum distance and angle off line the system will engage steering at. I just set them to the maximums it will allow.
We will have to have another look at it. Trouble is we have been spoilt with a built in system shared between the combine and main tractor which is far superior I think. Picks up lines no prob and works in reverse etc.
Having to get more or less bang on the line for it to work is a pain in the .........! That does need sorting one way or another, especially if dad jumps on.
We have altered it to the lowest forward speed 1.6km to allow switch on.
Having to get more or less bang on the line for it to work is a pain in the .........! That does need sorting one way or another, especially if dad jumps on.
We have altered it to the lowest forward speed 1.6km to allow switch on.
- Location
- South wales
Massey 6470
Member
- Location
- Co Antrim
Short answer is no, I’ve had one for 4 years and your right you nearly need to be bang on line before it wii engage. Compared to full auto steer it’s rubbish but once online it’s every bit as good, I’m told ezpilot is no better just nicer to look at but ezpilot pro is as good as autosteer but doesn’t work with a cfx you need a GFX
You should be able to change this in the settings without buying anything. If you go through the calibration settings you will see some options for approach and aggressiveness. I put in a link to the user manual for the CFX-750
User Manuals
There are only two options i believe for the XCN-750/GFX-350, that is a Nav-500 and a Nav-900. Nav-900's are for sale individually yet, but the Nav-500 is. https://agtogo.com/collections/gfx-350™-accessories
Nav-500 For Sale
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk