Tungsten Power Harrow Tines

[Chris W]

Is anyone running tungsten tines on their powerharrow? Are they worth 4 times the cost of standard tines ?

 

[mengeleguru]

Definitely

 

[will l]

Is anyone running tungsten tines on their powerharrow? Are they worth 4 times the cost of standard tines ?

Yes and Yes we use bolt on ones, for a kuhn

 

[FarmerBruce]

No doubt

 

[Chris W]

Has anyone got an idea of how many times longer they last? Any issues? Is it worth an extra £10/tine to go from 2 tiles high to 3 tiles ?

 

[Shropshire Farmer]

Yes got a set on Kuhn and they’ve done a 1000 acres and still loads of life in them.

 

[will l]

Has anyone got an idea of how many times longer they last? Any issues? Is it worth an extra £10/tine to go from 2 tiles high to 3 tiles ?

We have the three plates of carbide otherwise it scoops out the metal above the top one and a run of hard facing round the bottom and up the back outside edge I would guess there life is 5 times standard at least plus a saving in bolts ,

 

[Will 1594]

3 tiles here
Mix of flinty sand . Sandy loam , black sand
Black sand with flint in it , lime stone caps with flint in it . Some silt and black skirt
2000 acre upto now but not grinding it down at 3/4 k mostly drilling at 8/12 k
Can take a set of cousins Subsoiler point off in 20 acre after spuds if hard dry
Shzkerstor points will do 100

 

[Genesis]

Hi, I need to replace the tines on our Rabe PKE power harrow shortly. I have priced these:

power-harrow-tine-2x-carbide-tiles-rh-length-310mm-suitable-for-rabe-kramp - KRAMP

Discover power-harrow-tine-2x-carbide-tiles-rh-length-310mm-suitable-for-rabe-kramp at KRAMP. You can find the largest range of power-harrow-tine-2x-carbide-tiles-rh-length-310mm-suitable-for-rabe-kramp products online. It's that easy!

www.kramp.com

They are coming in at around €1500 to replace all 24 tines. I don't mind that so long as they last much longer than standard.
Does anyone have any experience of these Kramp tines? Are they any good?
Also, we have some stones, not really bad but some fields have quite a few. Will these tiles stick hitting stones?
Thanks!!!!

 

[AT Aloss]

Run standard tines on your outside rotors so they don't clout the clod boards & smash them to pieces - tungsten tines saved me a lot of downtime, a bit in wearing parts but cost a fortune in clod board repairs

 

[Will 1594]

Hi, I need to replace the tines on our Rabe PKE power harrow shortly. I have priced these:

power-harrow-tine-2x-carbide-tiles-rh-length-310mm-suitable-for-rabe-kramp - KRAMP

Discover power-harrow-tine-2x-carbide-tiles-rh-length-310mm-suitable-for-rabe-kramp at KRAMP. You can find the largest range of power-harrow-tine-2x-carbide-tiles-rh-length-310mm-suitable-for-rabe-kramp products online. It's that easy!

www.kramp.com

They are coming in at around €1500 to replace all 24 tines. I don't mind that so long as they last much longer than standard.
Does anyone have any experience of these Kramp tines? Are they any good?
Also, we have some stones, not really bad but some fields have quite a few. Will these tiles stick hitting stones?
Thanks!!!!

give mike metcalfe a ring
or p a
using both at minute well worth having as keep tine length