Electronics? Did you ever get to the bottom of the ISObus issues you were having a couple of years ago on that 5-series?deutz has poor warranty support i would stay away, they are unable to fix the electronics on my tractor under warranty and just gave up so
Oh gosh lawyers. Are they cheaper in Poland than here? I wouldn’t go throwing good money after bad. Sell it and move on.no i havent, maybe my lawyer will though court soon
Best of luck with it. Let us know how you get on.it will cost alot i dont care how much im taking this to the end, i am getting by for now using the gps speed
if they at least offered some sort of compensation or something, but leading me on and now just ignoring my emails and calls oh well wouldnt buy SDF again. when i was in hannover last at agritechnica i went to their booth and spoke with their top officials including the guy in charge of electronics they recalled there was some problem said yayaya we will call you back about it and nothing, so much for zzzzz germans
keeping things on the down low for now we will see how courts goes, if i lose i will post all my documentation online make a sh!t storm then
Taking a machinery manufacturer to court could be costlyOh gosh lawyers. Are they cheaper in Poland than here? I wouldn’t go throwing good money after bad. Sell it and move on.
Going well thanks. Getting the hang of ttv and all the bells and whistles
it will cost alot i dont care how much im taking this to the end, i am getting by for now using the gps speed
if they at least offered some sort of compensation or something, but leading me on and now just ignoring my emails and calls oh well wouldnt buy SDF again. when i was in hannover last at agritechnica i went to their booth and spoke with their top officials including the guy in charge of electronics they recalled there was some problem said yayaya we will call you back about it and nothing, so much for zzzzz germans
keeping things on the down low for now we will see how courts goes, if i lose i will post all my documentation online make a sh!t storm then
View attachment 649778
Managed to get back out this afternoon and finished spraying the Rape.
Interestingly I noticed on Daniels tractor the Speedometer dial is in Kms whereas ours came in Mph.
Anyone else noticed w
With wich cable are monitors conected? Can you send me a photo.View attachment 649778
Managed to get back out this afternoon and finished spraying the Rape.
Interestingly I noticed on Daniels tractor the Speedometer dial is in Kms whereas ours came in Mph.
Anyone else noticed this?
View attachment 649780
Can't help with the fuel issue, but did have problem with brakes myself on a 6150.4Anyone had this problem before View attachment 954071
Dealers laptop has been on it and says there's a shortage of fuel, checked over fuel lines and found a bad end on the main feed from the tank, sorted that and the alarm stayed off for months, but has come back, thought maybe it's filters, new filters on and it's worse!.. It used to come on after a few hours working, now it comes on as soon as there's load on the engine, pulling up hill, accelerating etc, then goes off after the loads gone.
Our old 620 did the same thing, changed the relief valve on the end of the injector rail, and no difference.
Anyone had this before and found a cure?
Also brakes on both the 6160 and 6180 are needing bled regularly, is there a prosedure for doing?
Thanks in advance.
Anyone had this problem before View attachment 954071
Dealers laptop has been on it and says there's a shortage of fuel, checked over fuel lines and found a bad end on the main feed from the tank, sorted that and the alarm stayed off for months, but has come back, thought maybe it's filters, new filters on and it's worse!.. It used to come on after a few hours working, now it comes on as soon as there's load on the engine, pulling up hill, accelerating etc, then goes off after the loads gone.
Our old 620 did the same thing, changed the relief valve on the end of the injector rail, and no difference.
Anyone had this before and found a cure?
Also brakes on both the 6160 and 6180 are needing bled regularly, is there a prosedure for doing?
Thanks in advance.