Search results

Hi all. I have a minor issue with my mx 80 loader fitted to my 4355. So the loader won't lift after a point when revving higher than 1400. A different point each time , and will go up again if I let it rest , then sticks again. It works on the linkage setting but not on the loader setting. The...

Hi all. I have a minor issue with my mx 80 loader fitted to my 4355. So the loader won't lift after a point when revving higher than 1400. A different point each time , and will go up again if I let it rest , then sticks again. It works on the linkage setting but not on the loader setting. The...

Hi all , my massey 4355 is on 420 85 34 rears currently. The question is can I go wider with the same rims ? Thanks in advance. Mark

Hi, I currently have a mf 4355 and wanted a 40k alternative been offered a mf 6245. Can anyone give me any insight to the pros and cons of each model please. Tia

Evening all, Could anyone offer some insight as I'm at a loss. My 4355 keeps blowing a fuse for the work lights. Checked the bulbs and they will all work for a short time. It in the left hand door pillar and it blows the lefthand 30 amp and the middle 15 amp. If I just put the 30amp in it will...

Hi all my 4355 has a problem with the cab fan. It works sometimes and not others. Sometimes it's both sides sometimes its just one side of the cab and it varies. Any ideas folks ? Big fuse in the roof panel and the relay seem fine Tia

So I have a 40k 24 speed powershuttle massey 4355. The only problem is that I'm getting 30 ish k flat out top gear, hare. The rear tyres are getting towards an upgrade, at about 15% , but would that be enough to slow it down so much? Any ideas what to look at/for elsewhere? Tia

Been looking at accord style quick hitch. What folks opinion of them on rear linkage. I have quick hitches on my linkage but wanted something easier for my ladies to fit. Mainly use back box , chain harrows then fert spreader and sprayer. Only fairly small kit as it only livery yard . Would it...

Hi all, Fitting a new radio in my 4355, struggling with getting a clean power source, the power that is there is low, but was normal before I changed the iso blocks, rewired twice and still the same. Any ideas , tia

Hi, looking for some ideas/info on how to go about getting my tractor to pick up my existing implements, we still have the telehandler so changing brackets on them isnt an option. The tractor has chilton the telehandler has qfit as do the implements Can you convert them to fit ? Any clever...

Has anyone got any loader tractors coming up for changing ? Ideally 90-130 hp 40k 20k budget Thanks in advance

What's the low down on a new holland supersteer? Decent system or an added extra just waiting to break?

Considering buying a ts100 with a loader. Needs to be an all rounder on an equestrian property, 50 acres approx of grassland to manage no baling or turning. What are your opinions of this tractor? Things to check when viewing , anything in particular?

Considering a kubota m9960 tractor , won't have to work hard , 50 acres , grassland chores , moving bales. What peoples thoughts experience of these machines?

Evening all , anyone got a loader tractor coming up for sale? Got 20000 to spend plus vat 4x4 40k Shuttle 80-100 hp ish Below 8000hrs Many thanks in advance

Hi, looking to buy a rear mounted sprayer and fert spinner. We only have a small equestrian holding about 50 acres of grass for grazing and hay making. Looking to buy a second hand sprayer and spinner. What should I be looking to get ? Size ? New cheap or second hand ? Many thanks in advance

Evening, Im looking for a tractor. Preferably a massey, but would consider anything. Ideally needs to be between 80 and 100hp 4wd , 40k , with a loader A left hand shuttle preferred Would prefere tidy with good history than low hours Doesn't need to do much in the way of work, only have 50...

Hi , I've been an looked at a massey 6265 today 13000 hours. Very tidy unit but the high hours worry me. I am on a budget of 18k and the the smaller units I've looked at so for that price have been abused and I think that worries me more. What do folks think about high hours versus high abuse?

Hi , I've been an looked at a massey 6265 today 13000 hours. Very tidy unit but the high hours worry me. I am on a budget of 18k and the the smaller units I've looked at so for that price have been abused and I think that worries me more. What do folks think about high hours versus high abuse?

Hi everyone looking for somewhere to get parts for my manitou. Need mainly electrical, a fuse board and a wiper motor to start with. Any advice would be appreciated, based just south of Nottingham