Anybody converted ag dispenser to feed barley???

[danpwll]

Anybody feed barley through an ag dispenser. As will we need a deflector plate and how fast do they go ?

 

[Dave W]

You’ll definitely need a deflector or probably better with a way of slowing the hydraulic flow right down. The converter goes a fair lick to throw sawdust 10ft
Or better still a proper feeder bucket that I just happen to have in stock

 

[Horn&corn]

We tried it. It just pours out. Could weld a plate to reduce the size of hole dropping onto conveyor if only for feed. Then deflect plate but would be tricky. Try it and see how fast it goes!

 

[danpwll]

You’ll definitely need a deflector or probably better with a way of slowing the hydraulic flow right down. The converter goes a fair lick to throw sawdust 10ft
Or better still a proper feeder bucket that I just happen to have in stock

Be silly money a new one !!!

 

[Dave W]

Be silly money a new one !!!

New feeder bucket?
I don’t do new

 

[The Observer]

We tried it. It just pours out. Could weld a plate to reduce the size of hole dropping onto conveyor if only for feed. Then deflect plate but would be tricky. Try it and see how fast it goes!

Quite like the sound of this for firing feed into large pens of sheep at lambing- save battling through them with bags. How far did it throw grain when you tried it?

 

[danpwll]

Haven't got one but just an idea !!! Been googling and can change speed on belt with different pulleys or get an oil restricter

 

[danpwll]

New feeder bucket?
I don’t do new

What have you got ????

 

[Dave W]

What have you got ????

Tanco mixer/feeder bucket. Think it’s late 90”s but strangely never been used. Could describe it as very shopsoiled.

 

[Bury the Trash]

an oil restricter

no a flow divider with a pipe from it to the return pipe easy enough to do.

 

[PI Stsker]

Tried and failed. Great if you want a trail of feed from the bunker to the feed passage and want the whole lot dumping out in 10 yards.

 

[davidroberts30]

Tanco mixer/feeder bucket. Think it’s late 90”s but strangely never been used. Could describe it as very shopsoiled.

Pic?

 

[Dave W]

Pic?

It’s buried in the shed. Was a summer purchase I’d forgot about till just now
I’ll dig it out this week

 

[thorpe]

New feeder bucket?
I don’t do new

nor do we our first kw half new at 18mths bought another as a spare , well it was like new 2 grand! had to use it for the first time this week! done nowt for 3 years i am glad nick bought it.

 

[thorpe]

nor do we our first kw half new at 18mths bought another as a spare , well it was like new 2 grand! had to use it for the first time this week! done nowt for 3 years i am glad nick bought it.

ive just realised the first one's been here over 10 years, no wonder the auger's fvucked!

 

[Dave W]

Pic?

I need to make a hydraulic tipping link unless it’s going on a loader

 

[davidroberts30]

I need to make a hydraulic tipping link unless it’s going on a loaderView attachment 1142682View attachment 1142683View attachment 1142684

sorry i misinterpreted your earlier post ,i seen tanco and thought "beet bucket"

 

[Dave W]

sorry i misinterpreted your earlier post ,i seen tanco and thought "beet bucket"

I have an old cleaner/feeder as well

 

[clem dog]

I use mine for feeding barley/maize distillers mix on top of silage. I have a peice of 1mm zintec cut that just pushes in above the hole that the barley drops onto the conveyor and you can adjust the amount by varying the distance that the plate is pushed in. It could be made longer and work as a deflector by putting a fold in the zintec to stop the feed from flinging, though I haven't needed to. It doesn't go over the feed barrier unless you carry the machine too high

 

[2wheels]

Quite like the sound of this for firing feed into large pens of sheep at lambing- save battling through them with bags. How far did it throw grain when you tried it?

if you are feeding rolls just bucket and chuckit.