Isobus?

[Welshlad91]

Yea with a bit of reading up I am a bit wiser now looks like it should work albeit my screen does not support the tc-geo function but not too concerned about that at moment, can it be installed on screen at a later date or not

I’m not a CNH expert, but I know of KUHN spreaders working on AFS 700 screens. If it’s not compatible at the moment, it’ll usually be an unlock or software update to get it to work. John Deere had issues with their 4600 screens which was down to processing power. They couldn’t be updated to fix them because the hardware wasn’t man enough. But I’m not aware of any similar issues with the CNH screens. The AFS700 from Case and the Intelliview4 screen (NewHolland) are the same software so your dealer may be more familiar with the one than the other.

 

[Welshlad91]

I’m not a CNH expert, but I know of KUHN spreaders working on AFS 700 screens. If it’s not compatible at the moment, it’ll usually be an unlock or software update to get it to work. John Deere had issues with their 4600 screens which was down to processing power. They couldn’t be updated to fix them because the hardware wasn’t man enough. But I’m not aware of any similar issues with the CNH screens. The AFS700 from Case and the Intelliview4 screen (NewHolland) are the same software so your dealer may be more familiar with the one than the other.

I should say, this was John Deere’s early 4600 screens, all been resolved now

 

[GeoPard]

To avoid compatibility issues you want to use software that fixes that for you, like our GeoPard https://docs.geopard.tech/geopard-t...eb-app/export/export-vra-map-in-isoxml-format