I’m thinking of buying a new or newish handler for my farm . Only thing I specify is the width . Narrow passage so nothing wider than 6,6. With it being a narrow passage im thinking centre pivot would be better for visibility but not sure. Closest dealer sells merlo but no centre pivot. Would a centre pivot be more cobbly than a rigid machine ? Any advice would be appreciated
Which telehander
- Thread starter valtraman
- Start date
- Location
- Somerset
Manitou 625-75, is 6ft wide and 6ft high, lifts 2.5t to 5.9m and is hydrostatic transmission. Ground clearance is better than the equivalent Merlo which is very low to the ground. Plenty of ex hire machines with low hours as they are favoured for the building sites where space is limited. Good second hand be around 30k, new will be mid 40s.
Downsides, not good in a field if it's wet, only 30k road speed and no pick up hitch.
We're on our 3rd one here as change when warranty is up.
Downsides, not good in a field if it's wet, only 30k road speed and no pick up hitch.
We're on our 3rd one here as change when warranty is up.
ACEngineering
Member
- Location
- Oxon
I think from the manitou stable you have to choose between the MT or MLT 625 as said above which isnt a bad machine at all so long as you dont need ground clearance! or the new manitou baby pivot steer which i mostly a Gehl loader with a tele boom on it. (manitou now own Gehl)
First drive: Manitou MLA-T 516 pivot-steer - Farmers Weekly
Manitou has owned the Gehl and Mustang compact loader brands for more than a decade, but has only recently made the decision to start selling these
www.fwi.co.uk
Down side of the MLA 516 is its rather poor lift capacity by the looks of it only 1600kgs which doesn't even compete with the old Matbro TR200 really like FWI are indicating!
Schaffer will do a pivot steer the right width for you with much higher lift than that, How wide is a JCB TM220???
ACEngineering
Member
- Location
- Oxon
spec sheet on the MLA 516 is a bit vague, The max payload as per EN474-3 is not something i'm familiar with!
Normally i would rate a pivot steers max lift at 500mm load centers on the pallet forks and on full lock. which they indicate 2ton so maybe it is in the matbro TR200 ball park capacity.
ACEngineering
Member
- Location
- Oxon
your only problem there is going to be support which might not be as good next year? i could be wrong but i think schaffer have a stronger presence in the UK now than weiderman??
Courier
Member
- Location
- M62 - M1 - M18 triangle
TripleSix
Member
- Location
- Helmsley, North Yorkshire
Just saying
ollie989898
Member
All you can do is demo a few machines and try them for your intended jobs.
Very much like the look of them Kramer’s
In fairness, the 435 here atm on the clamp is an animal , 22’ trailer load, one push , all gone, but I digress from the op’s question.So good you said it twice!
- Location
- Devon
Has anyone mentioned JCB?