del_boy
Member
- Location
- Herefordshire
Think you should push for some help and try and get sf3 chucked in aswell
Think you should push for some help and try and get sf3 chucked in aswell
Ha, trouble is we only have one JD on the farm and that was bought 7 years ago
Is it seeing any satellites at all? If it has lost the JD part of the signal I wonder if RTK farming could rig it up with a modem and get it working on their network?
Yes all sats on there. Like the JD SF1 as no sub to pay.
£2800 will pay your RTK sub for 5 years.
@Sonoftheheir , any progress with the dealer? I updated 2 SF6000s last week and wanted to get the update files for a SF3000 but i couldnt find them, they might have been pulled from stellarsupport.deere.com.
6000 dome can only do SF3 not SF2. The £1600 I think is the unlock to make it SF3 ready and the sub for the year togethor. So next years sub wouldn't be £1600. However if you've got on ok with SF1 you could stick with that.As I need it to work I’ve bitten the bullet and ordered a 6000 dome. Have traded in our 3000. Really isn’t good though after buying the original as it was supposed to be future proof!
Neighbour has a 3000 dome on RTK, that doesn’t work either!
We’ve only ever used SF1 as it’s good enough for us, I did try to get them to throw in a SF2/3 sub, but no it costs £1600 or something?!
@Sonoftheheir , any progress with the dealer? I updated 2 SF6000s last week and wanted to get the update files for a SF3000 but i couldnt find them, they might have been pulled from stellarsupport.deere.com.
Did they value your old SF3000 as a good, working unit? more or less than 50% of the cost of a 6000 dome?As I need it to work I’ve bitten the bullet and ordered a 6000 dome. Have traded in our 3000. Really isn’t good though after buying the original as it was supposed to be future proof!
Neighbour has a 3000 dome on RTK, that doesn’t work either!
We’ve only ever used SF1 as it’s good enough for us, I did try to get them to throw in a SF2/3 sub, but no it costs £1600 or something?!
Did they have a solution for you apart from spending money to upgrade to the 6000 dome.Same problem here, been told its 5G causing the problem
Same problem here, been told its 5G causing the problem
That claim is far too vague. At the support site
they say "StarFireâ„¢ Network changes were necessary to support the addition of new satellite constellations and additional enhancements. This required the introduction of a new signal."StellarSupport | Precision Ag | John Deere | US
StellarSupport is your precision farming support portal. Utilize this page to find up to date software, training, activate products and find manuals.www.deere.com
New satellite constellations would not ask for a change for the GNSS receiver as far as the owner accepts the current receiver performance. No degradation caused by new satellites constellations.
Sounds to me like they have changed the JD SF1/2/3 correction signal to incorporate support for new constellations and perhaps a frequency change to avoid 5G interference (the SW bulletin does not mention any 5G issues, could be bullpoo from the dealer). The requirement to update SW before a specific change gives the impression that the JD correction signal is changed. Now if the SFx signal is changed, old receivers might not be able to receive/decode the new format/frequency what ever.
The receivers should not lose GPS satellites (other constellations that they used to manage). The receiver should continue working with EGNOS and with RTK corrections. Is JD afraid of owners moving to RTK instead of their SFx signal or why do they not mention the details?
I wonder what @Woosh means with the "same problem"? Is the receiver/screen completely dead, does it receive satellites and derive position data but just not at any good accuracy or no position info at all? Tried EGNOS or RTK? One just has to be careful with EGNOS too if not used for a long time, check EGNOS correction signal satellite allocation.
This is all before the mandatory update. The receiver/screen may be bricked if the update fails completely. Nothing on the support site about issues after a successful update. They also have videos etc. showing the correct way to update these products.
I would think JD must have some in the country ready to sell?Problem now is getting the replacement dome, how long will it take? Stuff coming from Europe is getting held up and there’s going to be a lot of people wanting domes!