John Deere 9780/cts drive shaft yoke

[Case140]

Hi guys. I am trying (so far in vain!) to locate a driveshaft yoke for the primary driveshaft, that runs through the grain tank on a jd 9780 or cts. Part number H158816. or a complete shaft AH151618. It is a Dana spicer driveshaft, with sticker number 090DS45002-5406 on the shaft (also casting number F902819 on shaft) The yoke (bit I need) has numbers 901191 and M280 SPR on the casting. Any ideas please on dealers, breakers (I have tried Manners and waiting for BBurgess to come back), or any Dana spider suppliers. I am sitting here in disbelief as JD just say "obsolete" !!!!!!!!!!!!!

 

[davidroberts30]

It cant be that complicated
What spline or shape goes in the back?what size is the cups?

 

[Case140]

I thought so too......tearing what little bit of hair I have out!
Yoke shaft dia 44mm 27 spline
Cap stud centres 60mm x 115mm
boss length to cap Centre 104mm (can be 60mm longer ...)
cap dis 41mm

 

[Case140]

Do Dana spider have a size catalogue for Joe public? Cant see any online?

 

[Case140]

Sorry typo...cap diameter (bloody autocorrect) 41mm

 

[Case140]

John Deere H121681 Universal Joint

www.rdoequipment.com

This is different part no, says it fits but JD say it is different .....

 

[Phil P]

You could try calling DANA Uk

OEM Parts | Aftermarket Drivelines, Axles, U-Joints and More - Spicer

www.spicerparts.co.uk

I’m don’t think they will deal directly with the public but the will put you in touch with your local distributor. The were very helpful when I need to find parts for a telehandler axle a few years back. Ended up paying a 3rd of the price the dealer wanted.

 

[Case140]

You could try calling DANA Uk

OEM Parts | Aftermarket Drivelines, Axles, U-Joints and More - Spicer

www.spicerparts.co.uk

I’m don’t think they will deal directly with the public but the will put you in touch with your local distributor. The were very helpful when I need to find parts for a telehandler axle a few years back. Ended up paying a 3rd of the price the dealer wanted.

Thanks a mill

 

[nxy]

Both these break a lot of USA made combines and will ship to europe. Shipping is dear and can take two weeks or more so may be too late for you but you never know?

Tractor Parts | Used Parts | Worthington Ag Parts

For over 50 years, Worthington Ag Parts has been your source for quality new, rebuilt, used, and salvaged ag parts at the right price. Shop our selection today.

www.worthingtonagparts.com

All States Ag Parts | Used & New Tractor, Combine & Skid Steer Parts

All States Ag Parts is the leading supplier of tractor, combine, and skid steer parts to North America. Shop for new aftermarket, remanufactured, and used tractor parts.

www.tractorpartsasap.com

 

[Case140]

Both these break a lot of USA made combines and will ship to europe. Shipping is dear and can take two weeks or more so may be too late for you but you never know?

Tractor Parts | Used Parts | Worthington Ag Parts

For over 50 years, Worthington Ag Parts has been your source for quality new, rebuilt, used, and salvaged ag parts at the right price. Shop our selection today.

www.worthingtonagparts.com

All States Ag Parts | Used & New Tractor, Combine & Skid Steer Parts

All States Ag Parts is the leading supplier of tractor, combine, and skid steer parts to North America. Shop for new aftermarket, remanufactured, and used tractor parts.

www.tractorpartsasap.com

Thanks.....have tried both with no luck. .....well actually they are unsure why part numbers not matching. They think European models have completely different drive shafts

 

[nxy]

Thanks.....have tried both with no luck. .....well actually they are unsure why part numbers not matching. They think European models have completely different drive shafts

These people are pretty good they might be able to tell you if this will fit and at least its in europe already.

FORK H121681 for your – Agri Parts

Purchase FORK for your . Discover all the spare parts on the catalogue, take advantage of the fast delivery and competitive prices.

agripartsitaly.com

 

[Case140]

These people are pretty good they might be able to tell you if this will fit and at least its in europe already.

FORK H121681 for your – Agri Parts

Purchase FORK for your . Discover all the spare parts on the catalogue, take advantage of the fast delivery and competitive prices.

agripartsitaly.com

Thanks a mill...another call for the am

 

[nxy]

Thanks a mill...another call for the am

You will need to convert from inches but the american part H121681 is listed in a couple of places as a substitute for H158816 so you might get lucky

H121681 is listed by Dana as using a 1480 series UJ (1.375"cap X 4.188"span) with the following spec

27 SPLINE

1.751" = APPROX SPLINE INSIDE MAJOR DIAMETER

2.063" = APPROX LENGTH THRU SPLINED HOLE

2.500" = APPROX OUTSIDE GROUND HUB / SEALING DIAMETER

4.125" = APPROX LENGTH, CENTER OF UJ CAP TO END OF SPLINE

 

[Case140]

You will need to convert from inches but the american part H121681 is listed in a couple of places as a substitute for H158816 so you might get lucky

H121681 is listed by Dana as using a 1480 series UJ (1.375"cap X 4.188"span) with the following spec

27 SPLINE

1.751" = APPROX SPLINE INSIDE MAJOR DIAMETER

2.063" = APPROX LENGTH THRU SPLINED HOLE

2.500" = APPROX OUTSIDE GROUND HUB / SEALING DIAMETER

4.125" = APPROX LENGTH, CENTER OF UJ CAP TO END OF SPLINE

Fantastic! where did you find the Dana listing....? Do you have cap diameter and distance across caps please?

 

[Case140]

sorry my bad...I see you have the measurements up

 

[Case140]

Not the same....much smaller cap size and span Diameter of shaft way smaller Id say.
Measurements are correct except for those. I need cap size 41mm (1.61") and s
dist across caps to be 128mm (5.04") approx
Do you have access to the Dana listings?

 

[JeepJeep]

90-28-27​

 

[Case140]

No Good either (even though casting number same). Has to have spline hole all way through (to enable shaft to be fitted into place) and mine has strap and stud holding caps. Mine looks much heavier I think....thanks anyway- much appreciated

 

[JeepJeep]

 

[Case140]

View attachment 1130887

Not sure I understand these....I don't have 902827 anywhere. I have a casting stamp on the shaft (not on yoke) 902819.......?????