Ssafo compliant silage clamps

Jdunn55

Member
How big a clamp would you need for a clamp to hold 100 acres early first cut (late aprilish) and second cut (5ish weeks later)

And then a second clamp for 40 acres of maize and another 50 acres of third and 50 acres fourth cut (maize sandwiched between the two)

Would rather go long and narrow, ideally 30' wide but certainly no more than 40'

Any rough ideas on cost as well please

FYI its not for me it's for a friend who's got EA sniffing around in his area and knows his clamps aren't compliant
 
I put this up this summer. It's a pair of 45ft clamps, 90ft long. Cost about 150 plus ground works.
IMG_20240612_160457.jpg


It was clad after this photo and will be more than 40% funded through mid tier.
 

Jdunn55

Member
I put this up this summer. It's a pair of 45ft clamps, 90ft long. Cost about 150 plus ground works.
IMG_20240612_160457.jpg


It was clad after this photo and will be more than 40% funded through mid tier.
Thanks, was the £150 including the shed?
If so would you happen to know how much less it would cost (even just a guess would be great)

Did mid tier cover 40% of all of it or just the roof?

Also would height to the eaves?

Sorry for the questions! And thanks!
 

frederick

Member
Location
south west
Thanks, was the £150 including the shed?
If so would you happen to know how much less it would cost (even just a guess would be great)

Did mid tier cover 40% of all of it or just the roof?

Also would height to the eaves?

Sorry for the questions! And thanks!
With mid tier your likely to get the roof for free. So if your friend is building it to improve his compliance it's a no brainer to go for the roof as well.
 

Jdunn55

Member
With mid tier your likely to get the roof for free. So if your friend is building it to improve his compliance it's a no brainer to go for the roof as well.
Can you do it on a new clamp?

I thought you could only claim on an existing clamp?
So have to put the clamp up one year, then apply for a roof and then have it built the second year?
 
I wouldn't have a clue what it would cost without the roof but I'm certain that it would cost more with no roof than it would with a roof and mid tier contribution.

This was a new build, the mid tier offer was in place before I even had planning.

This is a tennants fixture. Build it tall and use use panels so if you leave it can just be taken off at ground level and either moved of sold.
 

Wesley

Member
We could do with some more clamp space to make life easier & not keep playing musical chairs with trying to empty one clamp ready for the next crop. First option short term I think is pad of concrete, bit of a channel a around sides & back & one across the front with a drain.
If they want walls (its an easy way to increase capacity without increasing footprint) then roof it at the same time
 

som farmer

Member
Livestock Farmer
Location
somerset
How big a clamp would you need for a clamp to hold 100 acres early first cut (late aprilish) and second cut (5ish weeks later)

And then a second clamp for 40 acres of maize and another 50 acres of third and 50 acres fourth cut (maize sandwiched between the two)

Would rather go long and narrow, ideally 30' wide but certainly no more than 40'

Any rough ideas on cost as well please

FYI its not for me it's for a friend who's got EA sniffing around in his area and knows his clamps aren't compliant
thank goodness, its not for you,

EA have specific regs for silage pits, and you are required to get their approval, in advance.

we have a stoned area, in the yard, where we put a big heap, no problem with that apparently, the big concrete one next to it, stopped us using it, until new effluent tank.

the inside ones, silage finished, full of cattle, so nothing said, thankfully.
 

Farmer Keith

Member
Location
North Cumbria
Yes, 6 in. Those are 5 foot panels so 10 foot walls. I'd love to put another panel on but I'm sure it's not engineered to take those sorts of loads. I think I've only ever seen one 4m high clamp and the steels were enormous.
IMG_2528.jpeg

4m high, 30ft clamps, 30ft to the eaves (which looks a bit daft now that it’s built.) 16” external steels and I think the shuttered central wall is 8”. £125k to build with £47k coming back from the mid tier, did a the ground works and a few little bits in house so maybe saved £10k?! Good building but a serious investment particularly for a tennant, it does nothing the the earth banked clamp didn’t.
 
Location
cumbria
Did 2 lots of 75x 30 for 110k no roof.
That did involve demolition of existing.

Roof will be 40ish when I get round to it.

Concrete has gone up 20% since then though.
 
Last edited:

Will you help clear snow?

  • yes

    Votes: 68 32.2%
  • no

    Votes: 143 67.8%

The London Palladium event “BPR Seminar”

  • 8,622
  • 120
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top