Good morning I’m really struggling with my dairy cow intakes, one day they lick the trough clean the next day there’s half of it left. I feel like my nutritionist is only out to sell tons of feed, I have a rep in the yard nearly every week with only just 6 months into my tenancy. They all inform...
It's probably been discussed before, so excuse the repetition. I'm looking at simple stubble cultivators. Like the Kverneland CTD, Kongskilde Deltaflex, or Lemken Karat. So, surface disturbing tines, one row of discs, and a press (either rings or cage). And I'm wondering what sort of hp/meter I...
After years of buying cake through bags Iv finally decided to buy a bulk bin.
I admit I’m quite new to bins so would like a bit of info before I buy. I’m currently looking at a hanco 9.5t bin. I wanted to be able to fill my quad snacker under it plus fill bags through a shoot to find out this...
Link to a Finacial Times article about the government plans for subs over the next few years 😢 Apparently they have been leaked the speech George Eustice is going to give on Monday
Click here - Www.ft.com
https://www.agriexpo.online/agricultural-manufacturer/bale-cutter-199.html
I'm looking at buying a bale splitter for feeding out 800-1000kg (heavy and very tight) round bale silage, mostly into a feeder wagon. Just torn the conus lugs out of my bale spikes again, tried the muck fork and...
Can someone from JD or with very good knowledge about it clear once and for all how to drive those gearboxes coz I see a lot of youtube videos slowing down with the lever.
My way of driving is full hand throttle in the field, on headlands I press full foot throttle to the floor and move hand...
Wondering if anyone has any suggestions on best ways to mix silage and straw with no mixer wagon?
I need to find a way of slowing the fodder through them as it’s powerful stuff just a bit on the wetter side.
I’ve a straw chopper and so far have been chopping a small amount of straw then a full...
Had the old girl since I was a boy...... had to put the 4wd on the feeder wagon to get some silo blown into the feeders.... the 2wd wasn't quite up to i, grounds hard 4 inches down but a bit skitty on the surface.
Anyhow, the wagon is mounted on the link arms and on the 2wd (pre senso) we made...
We use an ibc to add 1000l of water everyday to mixer. I’d like to do this without leaving seat to make quicker and safer. Can the collective genius of tff work out how I can do this Consistently without coupling up pipes, electric or anything and make it quick and dairy farmer proof. Thanks
What is best for baled silage, vertical tub feeder or horizontal twin auger machine? A lot of horizontal machines going 2nd hand for keen money. But tubs now seem more popular?
Weve moved from a 3.5 ton machine to a 5.5 ton machine and our buckets are 8ft wide and slightly narrower than the machine.
Probably need to move to 8'6" possibly 9' at a push and somewhere between 2.5m and 3.0m capacity, They are to be used for filling the feeder wagon, and muck, general dairy...
Afternoon I’m looking at buying a ts135a 06 plate with 9k hours very tidy
was wandering what people’s thoughts were on these tractors as currently running tm165 and 8340 all they do us hedge trimmin, be nice to go to the next model for a bit more comfort any advice would be appreciated
Yeah yeah, I know we are supposed to be saving the Planet and what have you but.....??? :unsure:
WTF, do I have a 100hp tractor with an economy PTO that cannot be used for more than an hour, else the berluddy DPF lights start shouting as the engine does not like running at 1500 RPM.
So I then...
Morning all, so I have my teleporter test next week, I've used teleporters for years but finally getting my test, anyway I'm not feeling very comfortable with it being so soon as I've had no proper training. I was just wondering if you guys had any tips for what to do in the test, and what they...
Bit of a rant.
lad in next village just bought a power Harrow from a dealer in Gloucestershire.
advertised as a 3m Kuhn. All runs up perfectly blah blah blah.
Delivered last week. Turns out to be a 4m which is no good to him. Still got Brown&Co lot no on it.
pto is so siezed they had a...
Looking for suggestions on feed out areas in the winter time. Previously cattle are out wintered until calving and brought in late feb/early March or by scan date. Usually start on straw anytime Now and then switch to silage/hay depending on condition etc nov/dec. Usually add in some...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.