KV Geospread Advice

[KB6930]

Can I revisit this slightly as looking at a geospread ( new) but will put through the isobus screen on a 14 yr fendt 724, I may have to get it section unlocked ? But that aside is there any drawbacks to using the tractor screen ? I.e are all operations available and clear like the box?

Saw your post on the other spreader thread .

If you're using it through isobus it'll use tractor GPS.

If you're using it through tellus you can use any GPS feed I originally used a feed from a patchwork black box then got a kv receiver I could've got it from greensrar if I wanted .

 

[Iben]

Is that a separate greenstar ie 2630 or built in one?

Run it on a 2630 screen. Have also run it on second screen in the MF and it works fine.

 

[KB6930]

@spikeislander how far away is your dealer ? Just take your tractor in and plug a spreader into it ?

 

[Battlefield Machinery]

Thanks. I’ll give that a try.

At least it’s an easier problem to sort out than trying to patch in the area where I left the border limiter down!

on 24 my it seems to leave you a swath about 6 from the hedge…have seen it corrected by putting About a 1/4 rate just on that width using the manual shut down….