Livestock building

Sam myers

Member
Mixed Farmer
Currently have a Building used as a straw shed But looking to convert it into a livestock building! currently has tin sides and stone floor so looking at concrete panels and concreting the floor. what depth would you recommend is ideal for the floor of a livestock building? ive been told 6 inch is enough but would rather put down too much than too little. and would anybody be able to give me a price on ready mixed concrete per cube please? i can work out how many cube i need but just not sure what price concrete is! thank you very much in advance
 

Sam myers

Member
Mixed Farmer
All ours is six inch, I was always told the base is more important than the thickness of the concrete, within reason of course. Concrete price will vary widely depending on location and distance to a quarry etc
i live within 5 minutes of a cemex quarry! i assume the cement will get mixed there as they are the local cement firm everybody uses
 

HarryB97

Member
Mixed Farmer
6 inches minimum with fibres and a smooth tamp finish then get the scrape passage grooved. As said above the hardcore base is the most part important, you want a minimum of a foot of hardcore in a livestock shed, more if you may convert it into something else one day. Around here concrete is just under 100 per cube, when working out how many metres add on 20% as it never goes as far as it should...
 

digger64

Member
Currently have a Building used as a straw shed But looking to convert it into a livestock building! currently has tin sides and stone floor so looking at concrete panels and concreting the floor. what depth would you recommend is ideal for the floor of a livestock building? ive been told 6 inch is enough but would rather put down too much than too little. and would anybody be able to give me a price on ready mixed concrete per cube please? i can work out how many cube i need but just not sure what price concrete is! thank you very much in advance
we used chalk in one shed it works well for the bedded area , it needs to be free draining underneath though .
 

Sam myers

Member
Mixed Farmer
6 inches minimum with fibres and a smooth tamp finish then get the scrape passage grooved. As said above the hardcore base is the most part important, you want a minimum of a foot of hardcore in a livestock shed, more if you may convert it into something else one day. Around here concrete is just under 100 per cube, when working out how many metres add on 20% as it never goes as far as it should...
What is the purpose of fibre? ive heard about it but unsure of the benefits
 

HarryB97

Member
Mixed Farmer
What is the purpose of fibre? ive heard about it but unsure of the benefits
They say it's to help reinforce it without the cost of mesh. We use fibres in all our sheds then mesh and fibres in all our yards and increase the thickness to a minimum of 8 inches.
 

Old Spot

Member
Location
Glos
I am thinking about the same, but I am considering 1m panels around the sides and then a raised sloping lying area with scrape passage (take on Orkney sloping floor). Bedding is a lost expense.
 

Will you help clear snow?

  • yes

    Votes: 68 31.6%
  • no

    Votes: 147 68.4%

The London Palladium event “BPR Seminar”

  • 12,618
  • 185
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top