Welger RP 200, 200, 202, 220, 235

[balerman]

Good stuff where u going next down the mf/fendt route? I see they have made a few changes was one in our local dealers so i had a good look at it

Not sure yet,dont need to change for a couple years.Plenty enough changes on that for my liking,time will tell tho.Plenty of options,my favourite dealer sells Vicon now and they have brought out a proper contractor baler,Kuhn and McHale to look at as well.

 

[Razorready]

Not sure yet,dont need to change for a couple years.Plenty enough changes on that for my liking,time will tell tho.Plenty of options,my favourite dealer sells Vicon now and they have brought out a proper contractor baler,Kuhn and McHale to look at as well.

I went to mchale last year from always haveing welger still have a old 220 master was a bit of a daunting move but im very happy after last season put 7000 bales through it with no issues

 

[Crex]

Going to find out today. Wonder where the kicker has gone? The feed rotor does look lighter, less teeth

Did you get it bought?

 

[Dave6170]

Did you get it bought?

They havent found out bale count yet! Plus i have a rp200 to try and get rid of

 

[Razorready]

They havent found out bale count yet! Plus i have a rp200 to try and get rid of

Can you trade it in?

 

[Dave6170]

Can you trade it in?

I ll try them to see. Doubt they d offer a decent price. Could try implement sale at mart

 

[Razorready]

I ll try them to see. Doubt they d offer a decent price. Could try implement sale at mart

Yea you might get a bit knocked off the 202 buying it straight aswell

 

[Dave6170]

29k bales on it. Look good for that

 

[Dave6170]

Did you get it bought?

Baler bought

 

[cousinjack]

Baler bought

What have you done with the 200 ??

 

[Dave6170]

What have you done with the 200 ??

Traded in

 

[Fragonard]

Baler bought

Best of luck with the baler. Add is gone. What was advertised price? Any pictures?
Thanks.

 

[Dave6170]

Best of luck with the baler. Add is gone. What was advertised price? Any pictures?
Thanks.

5.5k its arrived here in depot... with a bent drawbar!

 

[Dave6170]

Have tried the baler in some silage worked fine.
It does need the a kicker bar tho. Anyone know of 1? Ive tried a couple of breakers but no reply from them. If not i ll try make 1.

And i set the slide for bale pressure to the max and it still wasnt making hard enough bales. I went another 10 m after the beeper went. Is there something i can adjust for bale pressure?

 

[Sid]

Have tried the baler in some silage worked fine.
It does need the a kicker bar tho. Anyone know of 1? Ive tried a couple of breakers but no reply from them. If not i ll try make 1.

And i set the slide for bale pressure to the max and it still wasnt making hard enough bales. I went another 10 m after the beeper went. Is there something i can adjust for bale pressure?

It's set on the back door pressure on my 245.
Need to be done by dealer and it's a bit of a fiddle.
We had issues after winter service. 15 mins and it was reset and bales like rocks again.

 

[peterfarmer!]

What is the best Welger round baler?

Welger rp205 if you can find one,replacement for rp202

 

[balerman]

Have tried the baler in some silage worked fine.
It does need the a kicker bar tho. Anyone know of 1? Ive tried a couple of breakers but no reply from them. If not i ll try make 1.

And i set the slide for bale pressure to the max and it still wasnt making hard enough bales. I went another 10 m after the beeper went. Is there something i can adjust for bale pressure?

Got a kicker bar here,could put it on a pallet for you for courier if any use.

 

[biggles]

Just while I’ve got all you welger men here, has anyone got or no of a crop press roller to fit a 235? Have the flap across at the minute and not struck with it compared to the one I’ve used with a roller on, cheers

 

[Massey5700s]

Have tried the baler in some silage worked fine.
It does need the a kicker bar tho. Anyone know of 1? Ive tried a couple of breakers but no reply from them. If not i ll try make 1.

And i set the slide for bale pressure to the max and it still wasnt making hard enough bales. I went another 10 m after the beeper went. Is there something i can adjust for bale pressure?

Hi Dave6170,

I am looking at a RP202 special at the moment with approx 10,000 bales on. How is yours going and are you pleased with it?
Do people have issues with bearings failing and then damaging the rollers resulting in a new roller?

my first post

Massey5700s

 

[Greythundercloudys]

Welgar a great contractor baler, getn payed buy the bale, soft little bales out the 202 anyways.