KRM M2w as a used buy

[Bobthebuilder]

Only time I’ve had stripes is when I forgot to change back from headland setting on both krm and amazon machines

 

[grainboy]

Have 2 available,
non weigh cells,
1 with Quanton rate control

 

[Flat 10]

I’m should have a non striping Kuhn with weighcells available soon. Very tidy machine being replaced with the same again. So simple even I can drive it!

 

[robbie]

I’m should have a non striping Kuhn with weighcells available soon. Very tidy machine being replaced with the same again. So simple even I can drive it!

Christ!!!!

 

[daithi]

Why do you have to adjust the angle on a krm the the higher the rate of application? Any previous spreader that I have had you adjusted the angle to throw higher if top dressing in high crops.
The app also seems outdated compared to the kuhn app. I struggle to find many of the fertilisers I use unless it's from yara and the seem to list every yara fertiliser worldwide or maybe I am doing it wrong any tips?

 

[Boydvalley]

Mine must be a bit older, no actuators, no electrics.

Very simple, accurate, and so far reliable. A revelation after years with a Vicon wagtail. Some rust on the lower framework, none on the hopper.
Vanes are, as said, silly money.

View attachment 1086006

Thanks everyone for their replies. Going to look at a Krm L2 and a Vicon ro xl this week. Both with no electrics.
@7610 super q how do you do short work/ narrow strips without any electronic trickery. I’ve got 3 odd shaped fields that I could end up with a lot of overlapping. TIA

 

[Optimus]

Thanks everyone for their replies. Going to look at a Krm L2 and a Vicon ro xl this week. Both with no electrics.
@7610 super q how do you do short work/ narrow strips without any electronic trickery. I’ve got 3 odd shaped fields that I could end up with a lot of overlapping. TIA

I had a L2 for years.if bits were really odd shape I'd just shut it down but I only ran it at 12m so they were never usually big bits.

With the GPS now I'd probably go back to L model next time.not keen on the electrics an can't afford weigh cells

 

[7610 super q]

Thanks everyone for their replies. Going to look at a Krm L2 and a Vicon ro xl this week. Both with no electrics.
@7610 super q how do you do short work/ narrow strips without any electronic trickery. I’ve got 3 odd shaped fields that I could end up with a lot of overlapping. TIA

Just put up with it TBH. Never noticed any flat crops so far.