del_boy
Member
- Location
- Herefordshire
Have a 4m lemken solitair 9 with the old style LH agro 5000 control box, just can't seem to get the rate right when planting wheat, its over applying by a fair bit.
Can calibrate it several times and the load figure will always be similar.
The land wheel speed isnt far off the radar speed on the tractor and the total area for the field is really consistent at 5% over the gps area naybe 6% on a bad shaped field.
The handle on the right hand side of the hopper is in the tightest hole and the bracket it lockes into is in its tightest setting aswell on the slotted hole.
Anybody had similar or any ideas?
Can calibrate it several times and the load figure will always be similar.
The land wheel speed isnt far off the radar speed on the tractor and the total area for the field is really consistent at 5% over the gps area naybe 6% on a bad shaped field.
The handle on the right hand side of the hopper is in the tightest hole and the bracket it lockes into is in its tightest setting aswell on the slotted hole.
Anybody had similar or any ideas?