- Location
- Scotland
You need to buy the ardusimple board the coax plugs into. It then goes via usb into the tablet.
do I need it with header or without?You need to buy the ardusimple board the coax plugs into. It then goes via usb into the tablet.
It seems like it comes as a kit. Do I need to order anything else to connect it from the board via the usb?You need to buy the ardusimple board the coax plugs into. It then goes via usb into the tablet.
Buy with headers attached and save you a job when you take the next step very soondo I need it with header or without?
Thankyou. All ordered.Buy with headers attached and save you a job when you take the next step very soon
see started alreadyThankyou. All ordered.
How easy is it to make it rtk then?
Bloody easy if your lucky enough to have a base station near by. Only a few settings to alterThankyou. All ordered.
How easy is it to make it rtk then?
Is that something I can find out if I have before the unit arrives or do I just wait and see?Bloody easy if your lucky enough to have a base station near by. Only a few settings to alter
pretty muchIs that something I can find out if I have before the unit arrives or do I just wait and see?
once I get my bits from Ardusimple is it literally just plug and play?
Milford 41 miles from home maybe 45/46 to furthest block. Maybe a base station needed with us then?
you be fine on mine(if it stays working )Milford 41 miles from home maybe 45/46 to furthest block. Maybe a base station needed with us then?
You will need to go on to the agopen wiki and follow the guide about configuration of the f9p and antenna and updating the software on it. Once done you should get gps signal. I started like that but soon realise i needed the bno085 for tilt and roll to make it more accurate, then before i knew it i was at full autosteer even though i didn't really need itIs that something I can find out if I have before the unit arrives or do I just wait and see?
once I get my bits from Ardusimple is it literally just plug and play?
I was just going to do a rtk lightbar....You will need to go on to the agopen wiki and follow the guide about configuration of the f9p and antenna and updating the software on it. Once done you should get gps signal. I started like that but soon realise i needed the bno085 for tilt and roll to make it more accurate, then before i knew it i was at full autosteer even though i didn't really need it
Just turn WiFi hotspot on your phone, connect the tablet to the phones WiFi.Thankyou. All ordered.
How easy is it to make it rtk then?
Don't listen to him @Headless chickenI was just going to do a rtk lightbar....
Extra 150quid and autosteer later...
Don't listen to him @Headless chicken
I'm living proof that you don't need to succumb to the addiction. You don't need to become a mindless drone sitting idle while a computer steers your tractor. Help is available
If an rtk corrected lightbar is all you want, that's all you need create
(unless of course your ground has hills, then a bn005 for roll correction makes sense, obviously)
(oh, and implement control is really handy to precisely lift and drop the plough, or the seeder, or the harrow, or the.....)
(.....and well, it's not that hard to add section control for the sprayer)
But anyway, fight the addiction, autosteer is not compulsory!!!
Hope your Father is keeping up with the latest version, about four, perhaps five software updates in the last 24 hours!It's not a crippling addiction...
Both myself and father have done some manual steering while planting this year. One toughbook has developed a blue screen addiction and father forgot that the other needs a mobile hotspot.
Once he sees how you can make AB lines by clicking on any two points on a field boundary...He mostly is happy with a third toughbook that has a SIM card in it and iirc still running 5.6.
Version 6 might come as a shock. No point pushing that on him just yet though, not until I have changed all the cmps to BNO anyway.