Loads been stripped out of itThe pic of the interior is odd
Whats the price of a new perkins engine for mlt 728, 1997?Deutz 3.6L? i expect. Just doing bits for one in a manitou samething siezed solid! but is a 2015 plate.
New complete engine with ECUs etc £17.5k plus vat (the only engine offering from manitou, no short or long option)
(Manitou do not sell crank shaft, conrods, pistons or rings to rebuild and no exchange offering)
Deutz UK Exchange long engine still way too much money and the terms and conditions are quite extensive with extra charges if its not palleted correctly not cleaned, not wrpaed in shrink wrap, not full assembled or bits missing etc etc etc Also got to wait around 5 weeks for germany to build one!
Deutz UK parts come to around the 5k mark plus vat but 5 weeks wait on the crank shaft and no date on the conrods yet!
Presumably a Turbo?Whats the price of a new perkins engine for mlt 728,
I thought they were all turboPresumably a Turbo?
I said mltMT 728 was 90 hp with option of Turbo but the engine was used in lots of their models at the time before 1999 and Plastic Bonnet Side Engine Range arrived
Rob.. we're on Farming Forum where do logic and common sense become involved.?....I know bloke who had a drink with a fella in a bar in Singapore who was told by a call girl that one of her other customers from Alaska had a Deutz with an engine problem, so I can confirm that all 150,000 they build each year are rubbish !!!!Ok, so let’s use logic and common sense…… if it’s only 1 year old, I’m pretty sure merlo uk would “help” so it’s hardly a write off. What is the actual condition and what caused it ? Rather than we all say how terrible Deutz engines are !
Whats the price of a new perkins engine for mlt 728, 1997?
I thought they were all turbo
That's probably 20kCould the Mercedes engine be fitted?
Engine price?no there was non turbo MLT 628 and 728 options i think just rare to see one. MT 728 was common to find a non turbo.
Makes me think, would it be rocket science these days to have an engine protection system for loss of oil pressure?Maybe someone forgot to tighten the sump plug after an oil change ? Who knows ?
Got one on my carMakes me think, would it be rocket science these days to have an engine protection system for loss of oil pressure?
Makes me think, would it be rocket science these days to have an engine protection system for loss of oil pressure?
Tractors often have nobody on seatEvery machine has one, it's the nut on the seat there not always paying attention though
Nothing yet ,I used the owner of spreaders welder I will probably buy from gear gbhero,which welder did you buy ?
As on all irrigation pumps ….Makes me think, would it be rocket science these days to have an engine protection system for loss of oil pressure?