Bossfarmer
Member
- Location
- between Perth and Inverness
Wat about a lexion 7500? How does it compareNot entirely sure on that but we have a Lexion 650 and I know a trion 650 is identical at 350hp but Cummins not merc
Wat about a lexion 7500? How does it compareNot entirely sure on that but we have a Lexion 650 and I know a trion 650 is identical at 350hp but Cummins not merc
I don’t know but I look forward to reading about your experiences over the coming seasons. In theory the larger diameter drum should stand you in good stead.Wat about a lexion 7500? How does it compare
Lexion 7500 is a different machine to the 750. Lexion 7500 has 462hp Trion 750 has 435hp.Wat about a lexion 7500? How does it compare
That would be way bigger capacity than our 650 and a fair piece bigger than the 750 I would of thought. I have had one on demo I didn’t really want to see the combine I asked for a convio header but our Lexion apparently won’t run one so I couldn’t see if the Draper header would make our own Combine quicker. But the 7500 flew in comparison to what I was used to and I didn’t know it well enough to get the best out of it eitherWat about a lexion 7500? How does it compare
We had a 7500 on demo with a 9m against our 750 on a 7.5m header and it was a tiny bit quicker but not by much and there were definitely losses over the back where there wasn't anything from ours. I wasn't driving so just going by what I was told I'd think the trion should be a very good replacement for a 750 lexionWat about a lexion 7500? How does it compare
If he was doing the same speed as you with a 9m cutter at then there is 20% more output just there. If there were losses while using the automatics on the combine it would have been a case of the sensitivities not being set properly to give the same result as your current machine.We had a 7500 on demo with a 9m against our 750 on a 7.5m header and it was a tiny bit quicker but not by much and there were definitely losses over the back where there wasn't anything from ours. I wasn't driving so just going by what I was told I'd think the trion should be a very good replacement for a 750 lexion
Is that a 30ft convio header? I have enquired about one and been told they can’t take 30ft convio headers only 25ft convio or 30ft standard heaDerTrion in Oats apparently very nice. And we should buy one.View attachment 981870View attachment 981871
Is that a 30ft convio header? I have enquired about one and been told they can’t take 30ft convio headers only 25ft convio or 30ft standard heaDer
Just watching on YouTube the demo Montana trion has a30ft convio??Yes, been told the same.
Montana models. Standard can have the larger widths.
Yes, the demo we had was with a 30' convio.Just watching on YouTube the demo Montana trion has a30ft convio??
I think it was a 30 foot header but it was a Montana. I’d ask my son ‘the Claas expert’ except he’s on hunger strike as I’m looking at buying a small New Holland.Is that a 30ft convio header? I have enquired about one and been told they can’t take 30ft convio headers only 25ft convio or 30ft standard heaDer