What would it be like with sloppy yard scrapings with virtually no straw.?Love mine, great spread pattern, same issue as Pistonbroke, but nothing to worry about. Simple piece of kit
What would it be like with sloppy yard scrapings with virtually no straw.?Love mine, great spread pattern, same issue as Pistonbroke, but nothing to worry about. Simple piece of kit
Don't spread after a night on the beer and fill it with the door still at the back
There's a plan to follow to calibrate the valve for each stage of the ram. Takes a few goes and s bit if guesswork but fine once sorted. Not sure why they don't seem to be set up from the factoryWhat’s yours like for discharge speed and spread @Rs chunk did they used to come out very quickly and then slow down depending on ram stage?
What would it be like with sloppy yard scrapings with virtually no straw.?
Don't spread after a night on the beer and fill it with the door still at the back
There's a plan to follow to calibrate the valve for each stage of the ram. Takes a few goes and s bit if guesswork but fine once sorted. Not sure why they don't seem to be set up from the factory
is that the case with all of them or just newer ones?
Mine is ten years oldis that the case with all of them or just newer ones?
As the stages come out it speeds up as the stages are smaller and take less oil to fill but that’s what the controller for to make it equal mines a earlier one I have it set and never alter it I just go faster or slower. The newer ones look a better system. Machine itself has a good spread pattern cheap too run no chainsWhat’s yours like for discharge speed and spread @Rs chunk did they used to come out very quickly and then slow down depending on ram stage?
So can you get the ram to push the muck out at same speed all the time ?
I slow the last stage slightly because the muck is more compressed from pushing the load at the start. Once set up just leave alone and use flow control on the tractorSo can you get the ram to push the muck out at same speed all the time ?
What’s the electric cable for?
I looked in on the stand at the royal welsh to see if much had changed from mine and there was a bunch of eight blokes slagging off the machine because you would obviously have to change up a gear for every ram stage. I asked why they thought that and showed them how it works. Should be on commission from Marshall
What would it be like with sloppy yard scrapings with virtually no straw.?
All there stuff seems pricey though, I wanted a shelbourne diet feeder as first choice but it was a good bit more than bvl.Shelbourne was £7k more than the marshall new