rob h
Member
- Location
- east yorkshire
Just a thought but easily over looked have you checked the concave to make shure its not partly blocked between the wires
Yes, chaff spreaderWind sounds low compared to some other makes. Have you a chaff spreader? ie are you certain whether it’s sieve or walker losses?
The one in question is dronninborg designed and built. Same essentially as the previous 30 40 series.
Just new tinwork really.
Someone has to do this reply.But i am using a different brand to avoid the @Thick Farmer copyright
View attachment 827602
Genuine only have the part numbers.Can anyone help I need the numbers off the chopper belts on a Massey Ferguson 30 combine. I have the part numbers but need the numbers on the belts. Part numbers are D41942200 and D41978400. Thanks Phil
Dronninborg are Denmark.thanks, I was unaware, was this built in Italy?
Thanks for the reply. Was hoping someone might have non genuine ones on and be able to get the numbers for meGenuine only have the part numbers.
They're embedded into them.
Kramp do non genuine.Thanks for the reply. Was hoping someone might have non genuine ones on and be able to get the numbers for me
If it's any comfort, somebody local persevered with a MF 72** for a couple of seasons; they are back to a JD now...
Printed off and in the combine, thanksNot MF but applicable all the same
Main menuopened it up to 7 to ease the straw flow as it was smashing, it was worse on 5 as per book
I don't appear to have a N and no recommendations on the data screen, all out of the book for settings - 04 plate machine
Pull metal tab and measure with gaugesDrove a 40rs years ago that had the same problem. It came down to the concave not being level on both sides. Somewhere in the book it said you should set the concave to a certain number and check there is an 8mm clearance between it and the drum. You can adjust the concave to level it up. Solved the problem for me. Before that it was shovelling grain out the back.
Thank you Rust you have solved one of the great mysteries off the world !!Pull metal tab and measure with gauges View attachment 827885View attachment 827886View attachment 827888