Which of the two front mower

[James]

That was what happened when I had a demo

Was it a new machine or used?

 

[KB6930]

Was it a new machine or used?

New it was their demo machine .

 

[mengeleguru]

Krone was another 1k on top of Claas move, and Kuhn is £600 cheaper than Claas move. Was speaking to well known local contractor who had the krone float on demo for 3 days and no matter what they did it wouldn’t make a job of cutting neither. Part of me just wants to go with the Claas 3200fc push mower but just worried it won’t cope with ground too well. I’m not really that knowey , not flat but hilly type ground .

You might think you are pushing it but actualely you are pulling it .

the main frame goes over the top therefore pulling it.

 

[Mark C]

Got a Claas mover 3200 for this season. Have been really impressed with it. Easy to attach and set up. Makes a grand job

 

[Down farmer]

Got a Claas mover 3200 for this season. Have been really impressed with it. Easy to attach and set up. Makes a grand job

Same here this season have a class move on front and class on back previously krone (done v well) but class much better following ground v impressed with them and possibly easier driven

 

[James]

Same here this season have a class move on front and class on back previously krone (done v well) but class much better following ground v impressed with them and possibly easier driven

What size tractor and does the rear make the linkage twist much?

 

[Down farmer]

What size tractor and does the rear make the linkage twist much?

On a Nh 210 drives at her leisure ,have a valve on assister ram on right hand side which I shut when height is determined this help’s prevent twisting on linkage as ram is locked and also prevents oil flowing to other ram exacerbating the problem and causing more twisting Force . May not have been necessary as class mowers not the weightiest but done as a precautionary measure also done on hedgecutter tractor as this helps firm everything . Doesn’t cost much and easily fitted DIY

 

[The Grinch]

Contractor here mows with Claas front and rear, can’t fault it, always leaves a good cut and i believe not to power hungry.

 

[valtraman]

I bought the mchale in the end up and so far makes an excellent job of cutting , floats really well and I’ve had no problems at all. Just shows u can’t take everything u read on here as gospel .

 

[James]

I bought the mchale in the end up and so far makes an excellent job of cutting , floats really well and I’ve had no problems at all. Just shows u can’t take everything u read on here as gospel .

Are you running a mchale rear too?

 

[valtraman]

Are you running a mchale rear too?

No I’ve still my krone 320 on the back for now. It’s just 3 seasons . Mchale is a fair copy of the krone with conditioner tines and driveline