James
Member
- Location
- Comber, Down
Looks good
We have greenstar on ours .@Bob lincs you’re going to struggle to turn that seat all the way round! Looks a nice thing. Not sure id dare commit to the gps though. Did he say a Novotel receiver? As in the famous hotel chain? Why not do a cnh and have a tie up with Trimble who have had years and years to iron out the glitches?
I wish it had JD auto power and command arm aswellWe have greenstar on ours .
I wish it had JD auto power and command arm aswell
I wouldn’t replace my bigger JDs with anything else but for the lighter jobs the Fastrac is excellent. I can’t fault the service from the Doubleday group or Ben Burgess to be honest they both have some really good people in sales and service . As far as JCB goes Pecks staff at Ramsey are really good .Are you still liking the JDs and the service?
Since Ankers packed up everything seems to have gone down hill massively. A lot of people around us are swearing off BB completely.
Looks good tractor with lots of technologyCab and armrest certainly seem to have moved forward from last generation add the YouTube link for the none FB members!
There still building machines without ecu's and parking them in there quarry!Thought about one but as we have a new loadall on order , late as no ecu’s apparently , thought better of it and bought a jd
I agree.First ones landing on farms in July. Looks really good. Shame they didn’t bring out a 4240 to take on the Fendt 724. Pre production one I know of went really well, a few software issues but that should have been ironed out for full production ones.
About time. The screen was what put me off an 8330 when we changed tractors in 2017. Told them that at the time. Must have been the same since 2005 or something?
New Cases look really good.
New Holland will have to up there game with new cab, or will lose customers to Case in my opinion.
Need a local Case dealer here.
What model have you ordered?
No all this bit is different where the handbrake lever isWould it be possible to just change the armrest on older models?
I remember you could do this with MFs.
Do you still not like it?No all this bit is different where the handbrake lever is
Don’t need too, gearbox only puts out 180hp to the wheels on fastrac or 724. Gearbox limits power, apparently no way of overriding it either.First ones landing on farms in July. Looks really good. Shame they didn’t bring out a 4240 to take on the Fendt 724. Pre production one I know of went really well, a few software issues but that should have been ironed out for full production ones.
Great from olly blogs there
I really like it as a tractor to drive if I'm only sitting straight forward but if you're turned round you end up jammed against the steering wheelDo you still not like it?
I think I'm going to change the 2170 for one.